I have shown these in previous posts. They are for use with tabletop games with miniatures that are nominally 28mm scale. I have finally had time to package up the CAD files for download for others to 3D print.
At the moment, there are parts available to create gothic buildings or an alien fort.
The components snap together using OpenLOCK clips. This makes for easy storage and lots of possibilities for what shapes the buildings will be.
If you wish to print these yourself, you will need to download all of the generic parts and either or both of the Gothic and Alien fort components.
The Painting Rack is optional, but it makes it easier to support the components on end while, you guessed it, you are painting them.
I chose to paint all of the parts the same base wall colour, so that the Alien Fort and the Gothic buildings have interchangeable generic components.
If these parts are oriented appropriately, all of them will print without support. I print them with a 0.2mm layer height and 8% infill with a 0.4mm nozzle.
Downloads:
CC BY-NC-SA
CAD (mainly STEP not STL) zip files
That_Modular-Set 1 Generic floors
That_Modular-Set 2 Generic walls
That_Modular-Set 4 Gothic walls
That_Modular-Set 5 Alien fort walls
That_Modular-Set A OpenLOCK clips
That_Modular-Set B Painting racks
Please post a comment if you find these useful.
==
No comments :
Post a Comment