Search This Blog

Wednesday 25 December 2019

Derailleur front mount cover

On bikes that ship without the front derailleur but with the welded on mount, they usually have a blanking cover on the bracket.

Typically a plastic tile or even an aluminium shaped billet. Easy enough to buy but also very easy to model and 3D print.

I've created some custom ones.

3D printed.

I filled the letters with Milliput and sprayed with clear lacquer.


25.4mm wide, 26.5mm tall, 4.6mm thick, 2mm radius corners. 5mm wide x 2.2mm deep keyway on the back. Fit using an M6x10mm or M6x12mm countersunk screw.


No comments :