Oil painting drying rack

Just before I finished making this, Shelley said, she'd like something like that for her studio. I had to laugh, because that is exactly what this is for.

I made it because she needed more places to store her paintings. It is now in her studio drying oil paintings.

I had looked for something ready made, but I was disappointed with the quality or style. I decided to make my own out of beech.

==

Stackable wound markers

I have a plan to play a tabletop game with a friend in a few months time. From my side, this is an excuse and inspiration to make some scenery and paint some miniatures. Both things I know I enjoy. I also like the paraphernalia that helps with the game play.

Such things as markers for objectives and the status of units. There are lots to choose from but, I decided that the markers used for wounds could be made more convenient.

The most popular games use one of two types of marker. Warhammer 40K uses a count down of the remaining wounds. Others, like One Page Rules, use a count up of the number of damaging hits. The markers I have designed are best suited to the latter.

The numbers are based on binary. 1, 2, 4, 8 and 16 sizes. The maximum in any one 5-high stack goes up to 31 wounds. Easy to move as one unit.

Download:

Stackable wound markers mk2 (STEP not STL) zip

==

Gaming table

I have done some measuring and I can just about fit a 4' x 5' (1220x1525mm) table in my study and get round three sides of it. I would not want it there all the time, so I have built a demountable table that sits on fold up builders trestles when I need to take it somewhere or on shelving in my workshop storage area. 

48" is a little too far to comfortably reach over so I now understand why Warhammer 40k is usually played on a 44" rather than a 48" deep table. I have therefore made my table 44"x60" (1120x1525mm) which works for most tabletop games, including the one I am most likely to play, which is One Page Rules.

Most of the table is made of leftovers from The Shed build and paint from decorating various rooms of the house. 

We will also use the table for cakes and teas when we open our garden to raise money for the NGS charity. We've already bought a tablecloth for the purpose.

The first time I attempted to lift the tabletop, I decided that it needed handles. I've added some simple webbing handles that make it much easier to carry on my own.

The emulsion is fairly robust, but does mark. So before it needed repair, I added a couple of layers of clear coat. I'm always nervous of clear varnish or lacquers as they all have a risk of going white if the temperature is too cold. As it's winter, I made sure I warmed up the workshop well in advance before I started this job.

The picture does not do it justice. The result is very good.

==

A little tricky

I've been experimenting with glow and object source lighting (OSL).

Despite following a number of tutorials, I am not sure I've got the hang of glow effects. That said, it could be me being over critical or having been too close to it for too long.

What I am pleased with is how the OSL appears.

I found it relatively easy to decide which areas would be affected by the light and I think the result looks right.

==

Primer for painting miniatures

I primarily use water based acrylic paint for miniatures. Most of the time I tend to use a grey car primer, partly because I already have lots of it that I use for other things. Some paint schemes lend themselves to a darker base.

I have used hand painted primers on miniatures in the distant past, but that was never as satisfactory as a spray finish. Up until recently I tended to use Vallejo airbrush primer for models and miniatures. It has a good finish but it is very time consuming to apply. Recently I've been experimenting with rattle can primers as a quicker alternative.

I've selected a few from Amazon. I'm in the UK, so the paint vendors are likely to be different to those found in other countries.

Hycote grey is the one I've used for years on larger projects. It is the best value that I can find in the UK, followed closely by the Motip black. The Army Painter black is more than twice as expensive. The Citadel Chaos black costs so much more that I have not bought any to try.

So far I've established the following;

Drying time: I established a long time ago that primer needs to be allowed to dry thoroughly to ensure reliable compatibility with the top coat paint. To that end, I let primer dry for at least 24 hours.

Temperature: My experience is that all commonly available paint has poor adhesion when applied to cold surfaces and it dries with a better surface if the first couple of hours of drying are in a warmer environment. This may be academic for those who paint inside their home but I usually paint in my shed.

If it feels cold to me, I run a small heater to warm up the model and the paint before use. Not in any scientific way. I also keep the area warm for the first hour or so of drying time.

Ventilation: I am sure that anyone who has tried using a paint spray can inside knows the problem with the solvent smell. Even though I have a spray booth, my preference is to use rattle cans outside when the weather is suitable. It does not really matter what the temperature is because I'm only outside for a minute or two, but it needs to be calm and dry. Wind makes the surface finish uneven and frequently rough rather than a nice smooth coating.

If I have to spray a rattle can inside, I'll use my spray booth and then leave the room until the worst of the solvent smell has dissipated.

Vallejo airbrush primer

• Adhesion: Good on plastic but not robust on metal.
• Application: Time consuming but a smooth result.
• Cost: £, the bottle goes a very long way.

Hycote grey primer

• Adhesion: Good on plastic and metal.
• Application: Quick, slightly thick but a good result.
• Cost: £

Motip black primer

• Adhesion: Good on plastic and metal.
• Application: Quick, fairly liquid with a smooth result.
• Cost: £

Army Painter black

• Not yet used.
• Cost: ££

Citadel Chaos black primer

• Not purchased. 
• Cost: £££, noticeably more expensive than the others.

As I try them more, I'll update this page with my conclusions.

==

Hot rod bits

I spent a day machining a few more bits for Dean's hot rod.

==