Sunday, 21 March 2021

Bike build - Part 2

Top Coat

Satin black for the main colour.



At this time of year it's important that I run the infra-red lamps for a few hours before and after I spray on the paint. Keeping the work warm is essential for the paint to cure properly.


Before I did anything else, I left the frame to dry for a couple of days.

Detail



The next step was a little decoration.







I masked up an area and added a section of detail in a gun metal grey colour.




 





Once the paint was dry enough, I carefully removed the masking from all of the threads and bearing cups.


There was a little bit of overspray that needed tidying up.



==

Bike build - Next instalment

Bike build - Part 1

==

No comments:

Post a Comment