Monday, 23 October 2017

External storage with a display

I was thinking about all the games I have moved on to an external hard drive to free up space on the internal storage of my Xbox One. That led me on to think about how best to keep track of what's on a disk that is not connected to a machine.

At the moment I only have one external drive for the Xbox but lots of similar drives with other things on. When those drives are in a cupboard, unused, I need to know which of the drives has what on it. It would be handy to have a tidy way to display what games are on what external storage device that could be easily changed. At the moment I stick a bit of tape on the drive and hand write a list.

With the display technology used on things like the Amazon Kindle, where no power is needed to maintain the image, it would be possible to have an easy to read and easy to update visible list. Easier to change than crossing out and writing a new name on a paper list on the outside.

I had a search and was surprised that no one had produced one. The nearest I could find was an LCD touch panel for security.

The same could be applied to USB keys, perhaps with only room for a title. The technology can't be that difficult because they are already USB as are external hard drives. Adding a completely separate board to update the display would just show two USB devices when it is plugged in.  Even easier would be to get the device to read a text file with a known name and use the contents of that for the display on the outside.

With so much data that needs backing up hopefully this idea will get picked up by someone.


Sunday, 8 October 2017

Drawer to display cabinet

We bought an old newsprint storage drawer a few weeks ago.

I've carefully cleaned it up avoiding what I assume is lead dust from the letters that would have been stored in it and converted it in to a wall mounted display cabinet.

I chose to cover it in a thick layer of varnish both to seal in any remaining dust plus to strengthen the very thin dry dividers.

I had some 3mm clear acrylic sheet cut to size and added a rail at the top to use as a hook. I've put a facing strip at the front and screwed through to a batten behind. I've used a bit of adhesive as well so the stress is not concentrated at the screws.

I used a couple of hand made brass pins to support the batten holding the clear front in place.

Stained and polished to match the original. With some brass fixings to take in to account that the box joints were designed for a drawer not a hanging display cabinet.

I think it looks very nice.


Saturday, 7 October 2017

A gardener's 90

Shelley needed a way to carry her tools more easily in the back of Fender. At least I thought she needed some extra points to tie things in the back.

I've used some galvanised angle iron, sprayed black, to make a frame.

All the holes give lots of places to attach bungees.

The bit Shelley specifically wanted was a way to quickly store her spade, fork and edger. Tools she takes every time but were previously a fiddle to store securely in the back.

I'd thought long and hard for a bin or something that could easily hold the tools without taking up precious storage space. Eventually I came across what I needed and it is just the sort of thing for a gardener. I've re-purposed a grass collecting back from an old lawn mower.

I've straightened the metal frame a bit so it is as low as possible but still high enough to fit the handles past. The bag folds up, so only the wire frame, at one end, is raised at all when not in use.

A bungee, at the handle end, holds them up against the bulkhead.

Friday, 6 October 2017

Fix the dryer from a washer dryer

I like Miele kitchen appliances. We have only had a few over the years because they have been very reliable. Unfortunately our WT 2780 washer dryer let us down.

It was only the drying part. It still washed OK.

A little research on the Internet established that there was a good chance it was a thermostat and failing that the heating element. Even easier, the thermostats have a reset switch.

What I don't like about Miele is their secrecy over their service manuals. They appear to think that only qualified engineers are capable of repairing their equipment.

So like many people I have had to use guesswork to take it apart. If they made their technical instructions available, any competent person would at least have a better chance of fixing them with less risk of damage.

In order to help others, here's what I did to open up and reset the thermostat so the dryer works again.

First a WARNING: Turn off the power and remove the plug from the wall before you start.

The top needs to be removed. I'm not sure if the two rear screws need to be taken out or just loosened but I removed them using a T20 Torx driver

There is also a longer screw on each side, towards the front behind a cover. The cover comes out easily by slipping a small knife behind and gently prising it off. Again, I don't think the screws need to be removed, just loosened so the clips are pushed in far enough to clear the metal lip.

The top just lifts up at the front. and I suspect is intended to push back however with the screws completely removed mine just lifted up.

Once inside the thermostat is obvious and the reset can just be pushed in until it clicks.

I put it back together and gave it a test run. Working perfectly.

If it resets frequently I would assume there is underlying cause, however, so far so good.


Sunday, 1 October 2017

Bottle opener

I first saw this type of bottle opener a couple of months ago and now I see them all the time.

I guess it must be the fashion.

Anyway, I liked the idea so I made my own.

An in between job while I was waiting for other things to dry. Made from odds and ends of timber that I had to hand.