Search This Blog

Sunday 27 September 2015

Synology Cloud Sync Issues

I use OneDrive for my online storage. Microsoft provide unlimited space with my account so I am keen to use it with my Synology NAS box as an online copy.

The NAS box stores everything on my home network. I have it setup with my user home drives from all the computers and have organised shared areas for projects I've worked on over the years, there are home videos and all our photo's stretching back over a decade. There are lots of files that I would not want to be without. I obviously want to keep them all backed up.

I use a large USB disk for the primary backup but I would like to have an off-site copy. Synology provide the app Cloud Sync. It's not a backup solution but is useful for synchronising files and is the only way to get files to and from OneDrive using the NAS box. Unfortunately it has some peculiarities.

I've had it running for some time now and it appears to work OK. Today I tried to synchronise an extra folder structure but it failed on every file and folder!

In the interface on the Synology, I could click a previously unsync'ed folder but the log in the history tab said 'Download Failed' for every file!


The only way I could find to fix it was to Unlink the Synology profile from OneDrive and add a new one with a different name. If I used the same name if would create new folders but none of the files synchronised.

I could select the same folder structure, so at least it appears to only be downloading files it hasn't already got.

It has started to download files now but it will be a few days or weeks before everything it should download has completed!


Monday 14 September 2015

Q5 Mini DV Camera Settings

I have bought some very low cost video cameras. Ideal for use where using a mobile phone is inconvenient, too large or might get damaged. The model is a Q5 HD720P or so the instructions claim.


I have some issues with the description of the ebay advert but dealing with that is not the purpose of this post. The little camera suffer from having the time stamp permanently displayed in quite a large font in the top left hand corner. Hunting on the internet has shown me that lots of people are trying to turn this off but no solutions are available.

I have also not found a way to turn this off but I can set the time and get it to remember the time for the next recording without having to reset it each time.



The very bad English instructions provided with the camera are just wrong but the few bits of English visible in the Chinese instructions appear to be correct.

Set the Date and Time

To set the date and time it is necessary to create a small text file and save it in the root of the SD card. Whenever the camera is turned on it reads the file and sets the date and time from that. However, if you don't edit that file, the next time you start the camera it will use the old time!


To set the time create a text file called TAG.TXT. This can be created with any text editor such as Notepad in Windows.

It should have a single line with the date and time in the following format:
YYYY-MM-DD HH:MM:SS


Save that to the root of the SD card and if the camera is already on then turn the camera off and back on again. The TAG file is only read when the camera starts up.
Note that the camera does not read the file, nor does it record video, if it is connected to the computer via the USB cable. If you have saved the TAG.TXT file via the USB cable you must disconnect which usually reads the TAG file but just in case I always turn the camera off and back on again just to be sure.

Now for the bit not shown in the instructions.
The camera reads the tag file every time and sets the date and time AGAIN! Deleting the file does not solve the problem!


To get the camera to keep track of the time itself and not reset it each time it is important that the TAG.TXT file is changed so that it does not have a valid date. I found that setting all the numeric values to zeros worked to keep the existing date and time.

0000-00-00 00:00:00

Save that file back to the SD card and now when the camera is restarted it will not reset the time.

It's a bit of a faff because you have to deliberately set the time and then immediately following that put the SD card back in to a computer to edit that file to have zeros otherwise the time is reset the next time the camera is restarted! You will only have to do this every now and then if the time drifts too much.

Other Ideas

Another alternative to avoid having to ever set the date would be to use an old date and always start the time at zero:

2000-01-01 00:00:00

I tried other years such as 1111 but that was treated as invalid!

Using the Camera

Another bit that is very poorly written in the English instructions are what the buttons do and what the lights mean. Here are my descriptions of the functions.

Buttons
Turn On - Hold the ON/OFF button for about 1 second until the red and blue lights flash
Start recording or take a photo - Press the ON/OFF button. Needs a positive press for a moment.
Stop recording - Press the ON/OFF button.
Turn Off - Hold the ON/OFF button for about 2 seconds until the red and blue lights flash
Still mode - From video mode, press the mode button once, the light will change to blue
Audio mode = From still mode, press the mode button once, the light will change to red and blue
Standby mode = From audio mode, press the mode button once, the light will change to red

Do not remove the SD card until the lights have stopped flashing. It needs that time to finish saving the file.

Lights
Red and Blue both flashing - powering on or off
Red steady - video camera mode ready but doing nothing
Red slowly flashing - recording a video
Blue steady - stills camera mode ready
Blue off then back on - taking a still image
Red and blue steady - audio recorder mode
Red flashing and blue steady - recording sound only
Red and Blue both flashing but then goes off - you need to insert an SD card

Resolution
Video = 720x480
Still = 1280x1024


As mentioned above, the advert states the video is 1280x720 but I have been unable to find a way to set that and I am awaiting details from the supplier.

==
Edit: 17 Sept 2015
The supplier has agreed with me that the camera does not support the advertised resolution and has sent a refund.


I've ordered a different but similar camera. This one claims full HD 1920x1080 but the sticker still only says 1280x720, which is the lowest resolution I would like. Hopefully, this one will do what I need.